INTELLINET NETWORK 524681 User Manual User Manual
Page 61

54
If you want to reset all settings on this page back to previously
saved values, click “Cancel.”
2-5-7 Setup Procedure for Telstra BigPond
These settings only work when you’re using Telstra BigPond’s
network service in Australia.
User Name (1): Enter the user name assigned by Telstra.
Password (2):
Enter the password assigned by Telstra.
Assign login
Check this box to choose a login server by
server manually
yourself.
(3):
Server IP Address (4): Enter the IP address of login server here.
When you finish the settings, click “Apply” (5) and the following
message will be displayed on your Web browser:
1
2
3
4
5