INTELLINET NETWORK 524681 User Manual User Manual
Page 48
41
2-4-3 Remote Management
This router does not allow management access from the Internet to
prevent possible security risks (as when a too-simple password is
used or when the default password isn’t changed). However, you
can still management this router from a specific IP address by
enabling the Remote Management function.
Click “System” on the left side of the Web management interface,
then click “Remote Management.” The following message will be
displayed on your Web browser:
Below are descriptions of each option:
Host Address (1): Input the IP address of the remote host for
which you want to initiate management access.
Port (2):
You can define the port number through which
the router should expect an incoming request. If
you’re providing a Web service (default port
number is 80), you should try to use another
port number. You can use the default port
setting (8080), or something like 32245 or 1429
(any integer between 1 and 65534).
Enabled (3):
Select the field to start the configuration.
When you finish the settings, click “Apply” and you’ll see the
following message displayed on the Web browser:
1
2
3