INTELLINET NETWORK 524681 User Manual User Manual

Page 38

When you finish the settings, click “Next” (7); to go back to a
previous menu, click “Back.”

2-3-5 Setup Procedure for PPTP xDSL

PPTP xDSL requires two kinds of settings: WAN Interface Settings
(setup IP address) and PPTP Settings (PPTP user name and
password). First, WAN Interface Settings:

Select how you obtain an IP address from your service provider.
You can choose “Obtain an IP address automatically” (equal to
DHCP — refer to “Cable Modem” above), or “Use the following IP
address” (i.e., a static IP address).
WAN interface settings must be correctly set; otherwise, the

MTU - If you don’t know what it is, ask your service provider for a
proper value.

Connection Type - There are 3 options: “Continuous” keeps the
Internet connection alive (doesn’t disconnect); “Connect on
Demand” only connects to the Internet when there’s a connection
attempt; “Manual” only connects to the Internet when “Connect” is
clicked, and disconnects when “Disconnect” is clicked.

Idle Time Out: Specify the time to shut down the Internet connection
after no Internet activity is detected. This option is only available
when the connection type is Connect on Demand.