INTELLINET NETWORK 524681 User Manual - Manual (Page 77)

70
Below are descriptions of the options:
Fragment
Set the threshold of the wireless radio.
Threshold (1): Do not modify the default value if you don’t
know what it does (default value is 2346).
RTS Threshold (2): Set the RTS threshold of the wireless radio. Do
not modify the default value if you don’t
know what it does (default value is 2347).
Beacon Interval (3): Set the beacon interval of the wireless radio.
Do not modify the default value if you don’t
know what it does (default value is 100).
DTIM Period (4): Set the DTIM period of the wireless radio. Do
not modify the default value if you don’t
know what it does (default value is 3).
Data Rate (5):
Set the wireless data transfer rate to a certain
value. Since most wireless devices will
negotiate with each other and pick a proper
data transfer rate automatically, it’s not
necessary to change this value unless you
know what will happen after modification.
N Data Rate (6): Same as above, but only for 802.11n clients.
Channel Width (7): Set the channel width. Do not modify the
default value if you don’t know what it does
(default setting is “Auto 20/40 MHz”).
Preamble Type (8): Set the type of preamble. Do not modify the
default value if you don’t know what it does
(default setting is “Short Preamble”).
Broadcast ESSID Decide if the wireless router will broadcast its
(9):
own ESSID or not. You can hide the ESSID of