INTELLINET NETWORK 524681 User Manual User Manual

Page 70

2-6-3 Static DHCP Leases Table

This function allows you to assign a static IP address to a specific
computer forever, so you don’t have to set the IP address for a
computer, but can still enjoy the benefit of using DHCP server. A
maximum of 16 static IP addresses can be assigned here.

(If you set “Lease Time” to “forever” in the DHCP Server section,
you can also assign an IP address to a specific computer
permanently; however, you will not be able to assign a certain IP
address to a specific computer since IP addresses will be
assigned in random order this way).

Below are descriptions of the options:

Enable Static

Check this box to enable this function;

DHCP Leases (1): otherwise uncheck it to disable this function.

MAC Address (2): Input the MAC address of the computer or

network device (total 12 characters, with
characters from 0 to 9, and from a to f, such
as “001122aabbcc”).

IP Address (3):

Input the IP address you want to assign to
this computer or network devic.e

Add (4):

After you enter the MAC address and IP
address pair, click this button to add the pair
to the static DHCP leases table.

To remove all characters you just entered, click “Clear.”