INTELLINET NETWORK 524681 User Manual User Manual
Page 42

35
2-3-7 Setup Procedure for Telstra BigPond
This setting only works when you’re using Telstra BigPond’s
network service in Australia.
User Name (1): Enter the user name assigned by Telstra.
Password (2):
Enter the password assigned by Telstra.
Assign login
Check this box to choose a login server by
server manually yourself.
(3):
Server
Enter the IP address of the login server here.
IP Address (4):
When you finish the settings, click “Next” (5); to go back to a
previous menu, click “Back.”
When all settings are completed, you’ll see the following message
displayed on your Web browser:
1
2
3
4
5