Understanding the atmp router mode parameters – Lucent Technologies 6000 User Manual
Page 446
11-12
MAX 6000/3000 Network Configuration Guide
Setting Up Virtual Private Networks
Configuring ATMP tunnels
IP Adrs=10.1.2.3/24
IPX Frame=802.2
IPX Enet #=00000000
ATMP options...
ATMP Mode=Home
Type=Router
Password=private
SAP Reply=No
UDP Port=5150
GRE MTU=1472
Force fragmentation=No
Idle limit=0
ATMP SNMP Traps=No
The IP routing connection to the Foreign Agent uses the following parameters (shown with
sample settings):
Ethernet
Connections
any Connection profile
Station=foreign-agent
Active=Yes
Encaps=MPP
Dial #=555-1213
Route IP=Yes
Encaps options...
Send Auth=CHAP
Recv PW=foreign-pw
Send PW=home-pw
IP options...
LAN Adrs=10.65.212.226/24
Understanding the ATMP router mode parameters
This section provides some background information about configuring a Home Agent in router
mode. For detailed information about each parameter, see the MAX Reference.
Parameter
Usage
ATMP Mode
For the Home Agent, the mode is Home.
Type
When you set Type to Router, the Home Agent relies on routing (not a
WAN connection) to pass packets received through the tunnel to the
home network.
Password
Used to authenticate the ATMP tunnel itself. Must match the password
specified in the Ascend-Home-Agent-Password attribute of each
mobile client’s RADIUS profile. (All mobile clients use the same
password for that attribute.)