Lucent Technologies 6000 - Manual (Page 279)

Configuring Frame Relay
Configuring the MAX as a Frame Relay switch
MAX 6000/3000 Network Configuration Guide Preliminary January 4, 2001 5-31
The next set of parameters on MAX-42 specifies the circuit between its two Frame Relay
interfaces:
Ethernet
Connections
max
Station=max
Active=Yes
Encaps=FR-Cir
Route IP=No
Encaps options
FR Prof=dce-max
DLCI=100
FR Circuit=cir-42
Ethernet
Connections
max39
Name=max39
Active=Yes
Encaps=FR-Cir
Route IP=No
Encaps options
FR Prof=nni-39
DLCI=200
FR Circuit=cir-42
The following parameters on MAX-39 define the datalinks to MAX-42 and to the Pipeline
130:
Ethernet
Frame Relay
nni-42
Name=nni-42
Active=Yes
FR Type=NNI
Nailed Grp=777
Ethernet
Frame Relay
dce-p130
Name=dce-p130
Active=Yes
FR Type=dce
Nailed Grp=888