Icom IC-7700 - Manual (Page 41)

■
VFO selection
VFO is an abbreviation of Variable Frequency Oscilla-
tor, and is commonly referred to as a main tuning func-
tion.
The main dial is often called the “VFO knob.”
D D Selecting VFO-A/VFO-B
➥ In VFO mode, push to toggle VFO-A and
VFO-B.
• “ ” or “ ” appears when VFO-A or VFO-B is
selected, respectively
D D VFO equalization
➥
In VFO mode, push and hold for 1 sec. to
set the undisplayed VFO frequency and mode to
those of the displayed VFO.
• Three beeps sound when the VFO equalization is com-
pleted.
A=B
VFO-B VFO-A
A/B
3-3
3
BASIC OPERATIONS
■
Selecting VFO/memory mode
➥
Push to switch between VFO and memory
modes.
• “ ” or “ ” appears when in VFO mode, or the
selected memory channel number appears when in
memory mode.
• Pushing and holding for 1 sec. transfers the
contents of the selected memory channel to VFO.
(p. 8-4)
V/M
VFO-B VFO-A
V/M
V/M
“VFO” indicator
Memory channel
number
A/B
A=B