Icom IC-7700 - Manual (Page 157)

12-4
12
SET MODE
■
Level set mode
Sets the bass level of the receive audio tone in SSB
mode from –5 to +5. (default: 0)
Tone (Bass) 0
Sets the treble level of the receive audio tone in SSB
mode from –5 to +5. (default: 0)
Tone (Treble) 0
Sets the bass level of the receive audio tone in AM
mode from –5 to +5. (default: 0)
Tone (Bass) 0
Sets the treble level of the receive audio tone in AM
mode from –5 to +5. (default: 0)
Tone (Treble) 0
Sets the bass level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
Tone (Bass) 0
Sets the treble level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
Tone (Treble) 0
Sets the low-pass filter (100 Hz to 2000 Hz) and high-
pass filter (500 Hz to 2400) of the receive audio in 100
Hz steps in SSB mode. (default: OFF)
NOTE: When this setting is active, below 2 items
will be reset to default value, ‘0.’
SSB RX HPF/LPF – – – – – – –
Sets the low-pass filter (100 Hz to 2000 Hz) and high-
pass filter (500 Hz to 2400) of the receive audio in 100
Hz steps in AM mode. (default: OFF)
NOTE: When this setting is active, below 2 items
will be reset to default value, ‘0.’
AM RX HPF/LPF – – – – – – –
Sets the low-pass filter (100 Hz to 2000 Hz) and high-
pass filter (500 Hz to 2400) of the receive audio in 100
Hz steps in FM mode. (default: OFF)
NOTE: When this setting is active, below 2 items
will be reset to default value, ‘0.’
FM RX HPF/LPF – – – – – – –