IBM AA-RWF3A-TE - Manual (Page 99)

Replacing the 4/64 SAN Switch power supply
The 4/64 SAN Switch uses two power supplies, as shown in Figure 33 . The Fabric OS
identifies the power supplies from right to left on the nonport side as Power Supply
#1
(on the right) and Power Supply #2 (on the left).
IMPORTANT:
Operate the switch with both power supplies to maintain redundancy.
Scale: 1/8" = 1"
Scale:
5/16" = 1"
25187a
2
3 1
1. Power supply 2 2. Nonport side of switch
3. Power supply 1
Figure 33 4/64 SAN Switch power supplies on the nonport side
CAUTION:
Disassembling any part of the power supply voids the part warranty and regulatory
certifications. There are no user-serviceable parts inside the power supply.
SAN Switch installation guide 99