IBM AA-RWF3A-TE - Manual (Page 102)

scale: 1/4" = 1"
Scale:
3/8" = 1"
scale: 1/4" = 1"
25188a
2 1 4 3
7
5
8
9
6
1. AC power receptacle 2. Status LED
3. Handle (inset) 4. Captive screw (inset)
5. AC power switch 6. Power supply
7. Power supply 8. Captive screw
9. Handle
Figure 34 Installing the power supply in the 4/64 SAN Switch
CAUTION:
Do not force the installation. If the power supply does not slide in easily,
make sure that it is correctly oriented before continuing.
8. Secure the power supply to the chassis by tightening the captive screw.
9. Plug the power cord into the power supply and then press the AC power switch
to turn it on.
102 Installing field-replaceable units