IBM AA-RWF3A-TE User Manual
Page 87

LED name
LED color
Hardware status
Recommended action
No light
No signal or light carrier (media
or cable) detected.
Check the transceiver and cable.
Slow flashing
green
(flashing in
two-second
intervals)
Port is online but segmented
because of a loopback cable or
incompatible switch connection.
No action required.
Fast flashing
green
(flashing in
half-second
intervals)
Port is online and an internal
loopback diagnostic test is
running.
No action required.
Flickering
green (steady
with random
flashes)
Port is online and frames are
flowing through the port.
No action required.
Steady green Port is online (connected to
external device) but shows no
traffic.
No action required.
Slow flashing
amber
(flashing in
two-second
intervals)
Port is disabled because of
diagnostics or the portdisable
command.
Verify that the diagnostic tests are
not running.
Re-enable the port using the
portEnable
command.
Fast flashing
amber
(flashing in
half-second
intervals)
Port is faulty.
Check the management interface
and the error log for details on
the cause of status. Contact HP
Technical Support.
Port Status
Steady
amber (for
more than
five seconds)
Port is receiving light
or signal carrier at
4 Gb/s, but is not yet online.
No action required.
SAN Switch installation guide
87