Intel STL2 - Manual (Page 47)

STL2 Server Board TPS Basic Input Output System (BIOS)
Revision 1.0 4-39
Feature Choices or
Display Only
Description User
Setting
Keyboard Auto-repeat Rate 2/sec
6/sec
10/sec
13.3/sec
18.5/sec
21.8/sec
26.7/sec
30/sec Selects key repeat rate.
Keyboard Auto-repeat Delay 0.25 sec
0.5 sec
0.75 sec
1 sec Selects delay before key repeat.
4.2.2.6 Security Menu Selections
Table 4-11. Security Menu Selections
Feature Choices or
Display Only
Description User Setting
Supervisor Password is Clear (Display only). Once set, this can be disabled by
setting it to a null string, or by clearing password
jumper on system board.
User Password is Clear (Display only). Once set, this can be disabled by
setting it to a null string, or by clearing password
jumper on system board
Set Supervisor Password Press Enter Supervisor password controls access to the
setup utility.
When the key is pressed, the user is
prompted for a password; press ESC key to
abort. Once set, this can be disabled by setting it
to a null string, or by clearing password jumper
on system board.
Set User Password Press Enter When the key is pressed, the user is
prompted for a password; press ESC key to
abort. Once set, this can be disabled by setting it
to a null string, or by clearing password jumper
on system board.
Password on Boot Disabled
Enabled Disables or enables password entry on boot.
Fixed Disk Boot Sector Normal
Write Protect Write protects boot sector on hard disk.
Diskette Access User
Supervisor Controls access to diskette drives.
Secure Mode See Secure Mode Submenu. Submenu can only
be entered if supervisor and user password is
set.
Power Switch Mask Masked
Unmasked Determines whether power switch will function
from front panel
Option ROM Menu Mask Unmasked
Masked Determines whether on-board SCSI Option ROM
will allow the user to enter adapter configuration
with -A