Bottom view – Hitachi 36SDX01SR User Manual
Page 7
REMOTE CONTROL BATTERY INSTALLATION
AND REPLACEMENT
7
1. Open the battery cover of the remote control by pushing the
notched part of the cover with your fingers.
2. Insert two new AA size batteries in the remote. When
replacing old batteries, push them towards the springs and
lift them out.
3. Match the batteries to the (+) and (-) marks in the battery
compartment.
4. Replace the cover.
CAUTIONS
1.
If your PC ready color television set is to remain unused for a long period of time, for instance when you go on vacation,
unplug the PC ready color television from the wall outlet.
2.
Do not subject the remote control to shocks such as dropping it on the floor, etc. Precision parts may be damaged.
3.
Do not allow the remote control to become wet and avoid placing it in areas of high humidity. Do not leave it on or near
a heater. Excess heat or moisture may cause the unit to cease operation.
4.
If the batteries become exhausted, remote control operation may become erratic or stop altogether. Replace the old
batteries with new AA types.
BOTTOM VIEW
Lift up on tab to
remove back cover.
SUM-3.AA
IECR6.1.5V
SUM-3.AA
IECR6.1.5V
ǡ