Hitachi 36SDX01SR - Manual (Page 66)

66
PC ON SCREEN DISPLAYS
SET UP ADJUSTMENTS
RGB INPUT
KEYBOARD
DEGAUSS
This feature allows you to select PC INPUT between RGB1 or RGB2.
¥ Use right CURSOR
̈ to select between RGB1 or RGB2.
¥ Press MENU button to store and EXIT to quit.
¥ RGB1 when selected, the PC Input will be on the Rear
Panel.
¥ RGB2 when selected, the PC Input will be on the Front
Panel.
This feature allows you to use the Remote Control Keyboard.
¥ Use right CURSOR ̈ to check when Keyboard will be in
use.
¥ Press MENU button to store and EXIT to quit.
NOTE: Please don t check Keyboard USE on PC Set Up Menu, otherwise PC CONTROL will not work. Once you change
setting of Keyboard USE of PC Set Up Menu, you must restart PC to refresh PS/2 communication between your
set and PC. The Mini DIN 6 pin keyboard terminal on the Rear Panel does not work on this model.
This feature allows you to manually Degauss your set.
¥ Use right cursor ̈ to check and turn on the Degaussing
Coil.
¥ Press MENU button to store and EXIT to quit.
¥ Degauss function is convenient when cleaning any
misleading or discolorization in the Picture.
¥ This will momentarily turn on the Degaussing coil then
stop when completed.
The following adjustments are independent of the TV mode:
¥Press MENU in PC mode for on-screen display.
¥Press CURSORS right
̈ or ̇ left to highlight the item to be adjusted.
¥Press CURSORS up ̆ or down ̄ to select the highlighted item.
¥Use CURSORS right ̈ or ̇ left to adjust.