Hitachi 36SDX01SR - Manual (Page 14)

14
REAR PANEL JACKS
TIPS ON REAR PANEL CONNECTIONS
The S-Video connection is provided for high performance laserdisc players, VCRs etc., that have this feature. Use this connection
in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the PC ready color TV.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hookup cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 1
in the example on page 15.) Refer to your VCR operating guide for more information on line input-output connections.
You may use VIDEO, S-VIDEO, or COMPONENT: Y-CBCR/Y-PBPR inputs to connect to Input 2, but note that only one of these
may be used at a time.
Connect only 1 component to each input jack.
DO NOT connect standard VIDEO or S-VIDEO to Input 2 when using Y-CBCR/Y-PBPR input.
COMPONENT: Y-CBCR/Y-PBPR connections are provided for high performance components, such as DVD players or HDTV
set-top boxes. Use these connections in place of the standard video connection if your device has this feature.
When using the Y-CBCR/Y-PBPR input jacks, connect your components audio output to the PC ready color TV s Input 2 Left and
Right Audio input jacks.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the PC ready color
TV s CB input and the components R-Y output to the PC ready color TV s CR input.
It may be necessary to adjust TINT level to obtain optimum picture quality when using the Y-CBCR/Y-PBPR inputs. (See page
48 and 49).
To ensure no copyright infringement, there is NO MONITOR OUT output when using the Y-CBCR/Y-PBPR jacks.
IMPORTANT: TURN OFF THE TV/PC MONITOR AND THE PC BEFORE CONNECTING OR DISCONNECTING ANY
CABLES.