Hitachi 36SDX01SR - Manual (Page 13)

13
REAR PANEL JACKS
REAR VIEW
ᕃ
Antenna Inputs
The VHF/UHF terminal can be used for normal TV, cable TV (CATV), a video game, etc.
ᕄ
Audio/Video Inputs 1,2
The INPUT button will step through each signal source input each time it is pressed. Use the audio and video inputs to
connect external devices, such as VCRs, camcorders, laserdisc players,DVD players etc. (If you have mono sound, insert
the audio cable into the left channel jack.)
ᕅ
S-Video 1,2
Input provides S-Video (Super Video) jacks for connecting equipment with S-Video output capability.
ᕆ
Component: Y-CBCR/Y-PBPR Input 2 (See Tips on Rear Panel Connections on page 14)
Input 2 provides Y-CBCR/Y-PBPR jacks for connecting equipment with this capability, such as a DVD player or HDTV set-
top box.
ᕇ
Monitor Out
These jacks provide fixed audio and video signals which are used for recording.
There is NO MONITOR OUT when using COMPONENT VIDEO.
ᕈ
Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can
be controlled by the PC ready color television s main volume. Use these jacks for the SURROUND Left and Right channels.
(see page 16 and 20)
ᕉ
PC Control
Use this input for remote control mouse operation.
ᕊ
PC Audio Input
Connect external devices for audio in PC mode. (see page 63)
ᕋ
PC RGB Input 1 (RGB1)
Use this 15-pin D-Sub Input for your PC connection. (see page 60)
Y
S-VIDEO
COMPONENT
INPUT
1
INPUT
2
MONITOR
OUT
AUDIO TO
HI FI
L
R
PC CONTROL
PC AUDIO
INPUT
VHF/UHF
PC RGB INPUT 1
S-VIDEO
VIDEO
R-AUDIO - (MONO) / L VIDEO
R-AUDIO - (MONO) / L VIDEO
R-AUDIO - (MONO) / L VIDEO
P /C R R P /C B B
ቢ
ባ
ቤ
ብ
ቦ
ቧ ቨ
ቩ
ቪ