Hitachi 36SDX01SR - Manual (Page 60)

60
NOTE: If PC is set to correct horizontal and vertical frequencies and the picture is out of sync or scrambled, check the video
card documentation and set up software to properly set the monitor.
PC MODE CONNECTION AND OPERATION
NOTE: 1. This monitor can display VGA and SVGA formats:
VGA 1 640 X 480 (horizontal frequency: 31.469Khz, vertical frequency: 60.00Hz)
VGA 2 640 X 480 (horizontal frequency: 37.861Khz, vertical frequency: 72.809Hz)
SVGA 800 X 600 (horizontal frequency: 37.879Khz, vertical frequency: 60.317Hz)
LED flashes and PC picture does not appear at all when receiving a signal which is not supported on spec.
(See page 11 and 12).
If PC display setting is wrong the monitor will display: Please set PC for 640 x 480 60Hz, 640 x 480 72Hz,
800 x 600 60Hz display.
2. This monitor uses PS/2 format for the mouse interface. On some PC s, the mouse control may not work in the
following situations:
¥ Disconnecting and reconnecting mouse cable while PC ready color TV and PC power is turned on.
¥ Turning on the PC power before turning on the PC ready color TV power.
¥ Operating systems other than Windows 3.1x and Windows 95.
Consult your PC operation manual for the keyboard keys to re-start or shutdown your computer.
IMPORTANT: TURN OFF THE TV/PC MONITOR AND THE PC BEFORE CONNECTING OR DISCONNECTING ANY
CABLES.
REAR PANEL CONNECTION TO PC
R - AUDIO - (MONO) / L VIDEO
S-VIDEO
COMPONENT
VIDEO
INPUT
1
INPUT
2
MONITOR
OUT
AUDIO TO
HI FI
L
R
PC CONTROL
PC AUDIO
INPUT
VHF/UHF
PC RGB INPUT 1
(MONITOR OUT)
(PC MONITOR OUT) MOUSE
PORT
AUDIO OUT
S-VIDEO
Y P /C R R P /C B B
R - AUDIO - (MONO) / L VIDEO
R - AUDIO - (MONO) / L VIDEO