Hitachi 36SDX01SR - Manual (Page 18)

18
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING STEREO VCR OR STEREO LASERDISC PLAYER
1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the PC ready color
TV.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT(AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT(AUDIO/L) jack.
4. Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears automatically after
approximately eight seconds.
5. Press the INPUT button to return to the previous channel.
NOTE: Completely insert the cable connection when connecting to rear panel jacks. The picture that is played back will be
abnormal if the cable connection is loose.
If you have an S-VHS VCR, you can use the S-INPUT cable in place of the standard video cable.
VCR
R L/(mono) Video
PC ready color TV
Terminal Input
R L V S-VIDEO
PC ready color TV
Terminal Input
Hitachi Model
VT-S751A
Or Similar Model
Back of VCR
Back of VCR
INPUT
1
R - AUDIO - (MONO) / L VIDEO S-VIDEO
INPUT
1
R - AUDIO - (MONO) / L VIDEO S-VIDEO