Hitachi 36SDX01SR - Manual (Page 46)

46
Use this function to automatically turn the PC ready color TV on and tune to VIDEO: 1, 2, or 3, when it
detects a VIDEO input.
Use CURSOR ̈ to select Video Input.
Use CURSOR ̆ or ̄, then CURSOR ̈ , to change AUTO LINK setting.
When AUTO is selected, the PC ready color TV will turn on and tune to VIDEO: 1, 2, or 3 automatically, when the VIDEO: 1, 2, or
3 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When REMOTE is selected, the PC ready color TV will turn on and tune to VIDEO: 1, 2, or 3 automatically, when the VIDEO: 1, 2,
or 3 input device is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed.
This is convenient when you want to record a movie with your VCR and watch it later.
Select OFF to disable this function.
Press EXIT to quit menu or CURSOR
̇ to return to previous menu.
AUTO LINK
NOTE: 1. Once the PC ready color TV has been turned on using the AUTO LINK feature, it must be reset before AUTO
LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will
turn on your PC ready color TV as described above.
2. When using REMOTE mode, any remote control button will substitute for your video input device play button.
However, intended operation is for use with your VCR, laserdisc, or DVD play button.
Set Up Custom Video Audio Theater Info Set Up