HP xw8600 - Manual (Page 70)

Heat Dissipation 2 AC Input
Voltage at 100
VAC +/- 5
VAC, 50 Hz
+/- 3 Hz AC Input
Voltage at 115
VAC +/- 5
VAC, 60 Hz
+/- 3 Hz AC Input Voltage
at 230 VAC +/- 5
VAC, 50 Hz +/- 3
Hz
Normal Operation 350.8 BTU/hr 347.0 BTU/hr 342.6 BTU/hr
Sleep 6.8 BTU/hr 6.8 BTU/hr 6.8 BTU/hr
Off 0.2 BTU/hr 0.2 BTU/hr 0.9 BTU/hr
NOTES
1 This sleep status ignore the input sync signal check cycle when
metering the model in sleep mode.
2 Heat dissipation is calculated based on the measured watts, assuming
the service level is attained for one hour.
Longevity and
Upgrading Upgradeability features contained in the
product include:
One upstream and four downstream USB ports
Ergonomics The monitor meets the ergonomic requirement
of EN-ISO 13406-2 for flat panel displays.
Additional Information This product is in compliance with the
Restrictions of Hazardous Substances (RoHS)
Directive, 2002/95/EC.
This HP product is designed to comply with the
Waste Electrical and Electronic Equipment
(WEEE) Directive, 2002/96/EC.
This product is in compliance with California
Proposition 65 (State of California; Safe
Drinking Water and Toxic Enforcement Act of
1986).
This product is in compliance with the IEEE
1680 (EPEAT) standard at the SILVER level,
see www.epeat.net.
Plastics parts weighing over 25 grams used in
the product are marked per ISO 11469 and
ISO1043.
Display meets the requirement for low
frequency electromagnetic fields per MPR-II,
TCO, and prEN50279 A/B/C.
This product contains 0% recycled materials
(by wt.)
This product is 97.6% recycleable when
properly disposed of at end of life.
Packaging Materials
Corrugated Paper 2.19 kg
PE-LD Bags 0.09 kg
EPS Molded Foam 1.07 kg
RoHS Compliance Hewlett-Packard is committed to compliance
with all applicable environmental laws and
regulations, including the European Union
QuickSpecs
HP xw8600 Workstation
Technical Specifications - Monitors
DA - 12849 Worldwide QuickSpecs — Version 10 — 6.1.2008 Page 70