HP xw8600 - Manual (Page 39)

Synchronous Transfer
Rate (Maximum) Up to 300 MB/s
Buffer 16 MB
Seek Time (typical
reads, includes controller
overhead, including
settling) Single Track 0.27 ms
Average 3.5 ms
Full-Stroke 7.4 ms
Rotational Speed 15,000 rpm
Logical Blocks 143,374,738 - 512 byte blocks
Operating Temperature50° to 95° F (10° to 35° C)
Serial Attached SCSI
(SAS) 2.5” SFF Hard
Drives 146 GB
(10K rpm) Capacity 146,815,737,856 bytes
Height 0.583 in (14.8mm)
Width 2.76 in (70mm)
Interface SAS
Synchronous Transfer
Rate (Maximum) Up to 300 MB/s
Buffer 16 MB
Seek Time (typical
reads, includes controller
overhead, including
settling) Single Track 0.4 ms
Average 4.5 ms
Full-Stroke 8.5 ms
Rotational Speed 10,000 rpm
Logical Blocks 286,749,488 - 512 byte blocks
Operating Temperature50° to 95° F (10° to 35° C)
Mean time between
failures (MTBF) 1,600,000 hours
73 GB
(10K rpm) Capacity 73,407,865,856 bytes
Height 0.583 in (14.8mm)
Width 2.76 in (70mm)
Interface SAS
Synchronous Transfer
Rate (Maximum) Up to 300 MB/s
Buffer 16 MB
Seek Time (typical
reads, includes controller
overhead, including
settling) Single Track 0.4 ms
Average 4.5 ms
Full-Stroke 8.5 ms
Rotational Speed 10,000 rpm
Logical Blocks 143,374,738 - 512 byte blocks
Operating Temperature50° to 95° F (10° to 35° C)
Mean time between
failures (MTBF) 1,600,000 hours
QuickSpecs
HP xw8600 Workstation
Technical Specifications - Storage
DA - 12849 Worldwide QuickSpecs — Version 10 — 6.1.2008 Page 39