beautypg.com

Quickspecs – HP xw8600 User Manual

Page 68

background image

display product directly to you. Using the prepaid shipping labels
provided, return your failed display to HP in the same packaging as the
replacement. Certain restrictions and exclusions apply. For details see
your product warranty or contact HP Customer Support.

HP LP3065 30-inch
Widescreen LCD
Monitor

Panel

Type

30.0-inch Wide Format Active Matrix TFT
(thin film transistor)

Viewable Image Area
(diagonal)

29.77 in (75.623 cm)

Screen Opening
(W x H)

25.3 x 15.8 in (64.3 x 40.3 cm)

Viewing Angle (typical)*Up to 178° H/ 178° V (10:1 minimum contrast

ratio)

Brightness (typical)*

300 nits (cd/m

2

)

Contrast Ratio (typical)* 1000:1

Response Rate
(typical)*

12 ms (8 ms average gray to gray)

Pixel Pitch

0.250 mm

Color Depth Support

16.7 million colors

Backlight Lamp Life
(to half brightness)

40K hours

Color Gamut

92% of NTSC

On Screen Display
(OSD) Controls

Buttons or Switches

Input select, brightness up, brightness down,
power

User Controls

Brightness, input selection

Signal Interface/
Performance

Horizontal Frequency

100 KHz

Vertical Frequency

60 Hz

Native Resolution

2560 x 1600 @ 60 Hz
(native aspect ratio of 16:10)

Pixel Clock Speed

275 MHz

Anti-Glare

Yes

Anti-Static

Yes

Default Color
Temperature

6500 K

Video/Other Inputs

Plug and Play

Yes

Self Powered USB 2.0
Hub

One upstream, four downstream ports
(located on side of monitor, cable included)

Input Signal

Three dual-link DVI-D inputs
(Windows PC and graphics card that supports
DVI ports with dual-link digital bandwidth and
VESA DDC standard for plug-and-play setup
requires a DVI-D dual-link graphic card that
supports WQXGA
(2560 x 1600) resolution.)

Video Cable

Two dual-link DVI cables

Video Cable Length

5.9 ft (1.8 m)

Power

Input Power

Auto-Ranging, 100 to 240 VAC; internal
power supply, 50 Hz/60 Hz

Typical Power
Consumption

118 watts

QuickSpecs

HP xw8600 Workstation

Technical Specifications - Monitors

DA - 12849 Worldwide QuickSpecs — Version 10 — 6.1.2008

Page 68