HP LC3040N - Manual (Page 47)

Using the TV 41
AV/SV Mode
Adjusting the Volume
Press the (+) or (–) VOL buttons on the remote control to increase or decrease the volume.
AV/SV Operation
1 Press the ENTER button on the remote control to display the following On Screen Display (OSD)
menu items: Image Page, OSD Page, Audio Page, PIP/PAP Page, and Factory Page. (Press the
Exit key to return one level back in the OSD menu.)
2 Press the Up and Down arrow buttons to move up and down the Page icons. Press the ENTER
button when you arrive at your selection.
3 Use the Up and Down arrow buttons to highlight a function.
4 Press the Left or Right arrow buttons to either scroll through the options of a specific function or
view the submenu.
5 Press the Exit button to save your change and return to the OSD menu.
Factory Page
1 Press the ENTER button on the remote control to bring up the OSD menu.
2 Press the Down arrow button four times to highlight the Factory Page icon, and then press ENTER.
3 Use the Up and Down arrow buttons to highlight a setting and press ENTER.
4 Press the Left and Right arrow buttons to scroll through your options.
5 Press the Up and Down arrow buttons to select other settings on the Factory Page.
Or
Press the EXIT button to save the setting and return to the OSD menu.
6 Press the Exit button to remove the OSD menu from your display.
Factory Page Function Options
Close Caption Displays text. • Off
• CC1
• CC2
V-chip Blocks channels.
Sleep Timer Select the number of minutes you would like
the display to power off. • Off
• 30 Minutes
• 60 Minutes
• 90 Minutes
• 120 Minutes
Aspect Select the display ratio for your screen. • Normal
• 4:3
•
Panorama
Noise Reduce Enhances quality of standard definition, off air
media, and standard definition video. • Off
• Weak
• Medium
• Strong
Recall Default Puts all of your settings back to their default. Left arrow button resets all
settings to their default.