HP LC3040N - Manual (Page 23)

Using the TV 17
Setting the TV Receiving Mode
To receive locally broadcast programming, you need to set the receiving mode to Air or Cable.
1 Press the ENTER button on the remote control to display the Menu screen.
2 Arrow down and press the ENTER button to select the System Page.
3 Arrow down and press the ENTER button to enter the TV Country section.
4 Press the Right Arrow to select a Air or Cable mode.
5 Press the EXIT button to save your selection.
Selecting an Input Source
To view different sources on your display such as a DVD Player, VCR, PC, or game console, and so
on, you need to set the input source.
1 Press the Input Select button on your remote control to bring up the Select Source menu.
2 Use the Left and Right arrow buttons until you see the desired input source on your display.
3 Press the EXIT button to return to your display.
Or
Wait a few seconds, and your selected input mode will take effect without pressing more keys.
Selecting a PIP Source
The PIP (Picture-In-Picture)Source button on the remote control displays your sub source in a smaller
window. Continuously pressing the PIP Source button scrolls through all available sub source options.
Selecting the PIP Size
The PIP Size button on the remote control changes the PIP size from small, middle, and large.
POP Button
The POP (Picture-Outside-of-Picture) button on the remote control displays the last 8 channels you
selected around your current channel. Use the Left and Right arrow buttons on the remote control to
activate a channel. You can only activate one channel at a time. Use the Up and Down arrow buttons
on the remote control to scroll through the previous channels you selected.