HP LC3040N - Manual (Page 42)

36 Using the TV
You can make the following adjustments in the PIP/PAP Page:
PIP/PAP Page Function Options
PIP/PAP Turns on or off Picture-In-Picture and Picture-
And-Picture. • PIP
• PAP
• Off
Sub Source Select an input source to be displayed in
Picture-In-Picture or Picture-And-Picture mode. available sources
Display Size Select a size for the PIP display. • Small
• Middle
• Large
H-Position Moves the PIP to the left and right on your
display. 0 to 100
V-Position Moves the PIP up and down on your display. 0 to 100
Factory Page
1 Press the ENTER button on the remote control to bring up the OSD menu.
2 Press the Down arrow button five times to highlight the Factory Page icon, and then press ENTER.
3 Use the Up and Down arrow buttons to highlight a setting and press ENTER.
4 Press the Left and Right arrow buttons to scroll through your options.
5 Press the Up and Down arrow buttons to select other settings on the Factory Page.
Or
Press the EXIT button to save the setting and return to the OSD menu.
6 Press the EXIT button to remove the OSD menu from your display.