HP LC3040N - Manual (Page 43)

Using the TV 37
You can make the following adjustments in the Factory Page:
Factory Page Function Options
Recall Default Puts all of your settings
back to their default. Left arrow button resets all
settings to their default.
Auto Adjust (VGA mode only) Adjusts
the image-related functions. • H Position
• V Position
• Size
• Phase
TV Mode
Adjusting the Volume
Press the (+) or (–) VOL buttons on the remote control to increase or decrease the volume.
Changing Channels
Press the (+) or (–) CH buttons on the remote control to change the channel up or down a channel.
TV mode operation
1 Press the ENTER button on the remote control to display the following On Screen Display (OSD)
menu items: System Page, Image Page, OSD Page, Audio Page, PIP/POP Page, and Factory Page.
(Press the EXIT button to return one level back in the OSD menu.)
2 Press the Up and Down arrow buttons to move up and down the Page icons. Press the ENTER
button when you arrive at your selection.
3 Use the Up and Down arrow buttons to highlight a function.
4 Press the Left or Right arrow buttons to either scroll through the options of a specific function or view
the submenu.
5 Press the EXIT button to save your change and return to the OSD menu.