Henny Penny OFE/OFG-322 - Manual (Page 28)

Model OFE/OFG-321,322,323,324
2-23. AUTOLIFT 1. Remove electrical power supplied to unit.
TRANSFORMER
REPLACEMENT
(if applicable)
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2.
Remove control panel.
3. Label and remove wires from transformer.
4. Using a Phillips-head screwdriver, remove the screws securing
transformer to shroud and remove transformer from shroud.
5. Install new transformer in reverse order.
2-24. AUTOLIFT PC BOARD 1. Remove electrical power supplied to unit.
REPLACEMENT
(if applicable)
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2.
Remove control panel
3.
Disconnect connectors from PC board.
2-28 606