Scanning quickly with scanner buttons, Scanning to the hp precisionscan pro software – HP 5400c Series User Manual

Page 28

Scanning from scanner buttons

Back to TOC

Scanning quickly with scanner buttons

Use the scanner buttons to scan quickly to a destination using settings
optimized for that destination. A destination is a printer, file, or another
program, such as your e-mail or word-processing program.

If you are scanning slides or negatives using the HP Scanjet
Transparency Adapter (XPA), you must scan from the HP
Precisionscan Pro software. See

"Scanning from the XPA" on page 79

Scanning to the HP Precisionscan Pro software

When you use the Scan To button (

), you send directly to the HP

Precisionscan Pro software. Using the HP Precisionscan Pro software,
you can preview scanned images and make changes to the images
before you send them to a destination or file them.

1 If your scanner has a 16-character LCD, make sure that either

Powersave On, Ready, or HP Precisionscan appear on the LCD.
(See

"Front panel and accessories comparisons" on page 3

Note:

If another program name appears in the LCD, press the

Select Destination button (

) up or down until

HP Precisionscan is listed in the scanner’s LCD.

2 Close the HP Scanjet Copy Utility and the HP Scanjet Controls

control panel if they are open on your computer.

3 Place the original face down on the scanner glass and close the lid.

To load items in the ADF, see