High End Systems DL1 - Manual (Page 49)

DL.1 User Manual Fixture Operation 3-17
3
DMX Values Menu
This menu displays the current values for
the DMX link. When viewing DMX value
settings by Channel, the DL.1 fixture
displays current values for Channels 001–
512 in two lines of three DMX values each
per screen. Figure 3-3 shows an example of
the first two lines displayed. The number at
the beginning of each line indicates the first
channel with a value displayed on that line.
To View DMX Values:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Use the left and right arrows on the Navigation button to scroll to the
INFORMATION MENU and press the Enter button to select.
3. Use the left and right arrows on the Navigation button to scroll to the
DMX VALUES MENU option and press the Enter button to select. The display will
read BY CHANNEL.
4. Press the Enter button to select.
5. Scroll through the DMX values listed to the desired Channel.
Temperatures Menu
This menu displays the fixture’s internal temperature at the Intake and Lamp sensors
in degrees centigrade.
To access the Temperatures Menu:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Use the left and right arrows on the Navigation button to scroll to the
INFORMATION MENU and press the Enter button to select.
3. Use the left and right arrows on the Navigation button to scroll to the
TEMPERATURE option and press the Enter button to select.
4. Use the left and right arrows on the Navigation button to scroll to
CURRENT, MINIMUM, MAXIMUM, or RESET and press the Enter button to select.
OR, to reset internal temperatures to the Current temperature:
Use the left and right arrows on the Navigation button to select a sensor and
press the Enter button to select, or (for the RESET option) select NO to not reset
the sensors, or YES to reset all sensors to current temperatures.
Channel DMX Value
001 0
002 255
003 0
004 255
005 0
006 0
001 0 255 0
004 255 0 0
Figure 3-3 Reading the DMX
Values Menu Display
The table below
describes the first
two lines displayed
in the DMX
Values Menu
shown above it.
Scrolling down
reveals addition
channel values in
the same format