HP TOUCHSMART 9100 - Manual (Page 49)

S5 Maximum Power
Savings Disables/enables S5 Maximum Power Savings. Enabling this feature reduces the power of this
system as much as possible in the S5 state. This feature must be disabled if you want to enable
Wake on LAN from S5.
WOL in S5 Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5
during a normal shutdown event. The S5 Maximum Power Savings feature must be disabled in
order to enable limited Wake on LAN from S5.
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5-5 Computer Setup—Boot
Option Description
Boot-time Diagnostic
Screen Disables/enables POST diagnostic messages display.
Esc: Boot Menu Disables/enables POST Esc: Boot Menu message display,
F9: Diagnostics Disables/enables POST F9: Diagnostics message display,
F10: Setup Disables/enables POST F10: Setup message display,
F11: Recovery Disables/enables POST F11: Recovery message display,
F12: Boot From LAN Disables/enables POST F12: Boot From LAN message display,
(Boot Device Priority)
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
● CD-ROM Group
● HDD Group
● Floppy Group
● Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
system has started.
Floppy Group Boot
Priority Specifies boot device priority within removable devices.
CD-ROM Group Boot
Priority Specifies boot device priority within CD/DVD drives.
HDD Group Boot
Priority Specifies boot device priority within hard drives.
Network Group Boot
Priority Specifies boot device priority within bootable network devices.
Table 5-4 Computer Setup—Power (continued)
Computer Setup (F10) Utilities 43