HP TOUCHSMART 9100 - Manual (Page 46)

● Power
● Exit
Use the arrow keys to select the appropriate heading, then press Enter . Use the arrow (up and
down) keys to select the option you want, then press Enter . To return to the previous screen,
press Esc .
4. To apply and save changes, press the F10 key.
If you have made changes that you do not want applied, press the F5 key to return to the default
values.
CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only
after exiting the F10 Setup screen.
Table 5-1 Computer Setup (F10) Utility Main Menu
Heading Table
Main Computer Setup—Main on page 40
Advanced Computer Setup—Advanced on page 41
Boot Computer Setup—Boot on page 43
Power Computer Setup—Power on page 42
Exit Computer Setup—Exit on page 44
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5-2 Computer Setup—Main
Option Description
System Time Allows you to set system time.
System Date Allows you to set system date.
Language Allows you to select language.
Floppy Diskette A: Allows you to set drive A to:
● Disabled
● 1.44 MB 3.5”
● Not Installed
40 Chapter 5 Computer Setup (F10) Utility