HP TOUCHSMART 9100 - Manual (Page 12)

10 IR emitter (blaster)
(select models only) Adhere to your TV set-top box IR receiver area to receive the remote control
signal while watching and recording TV programs. This is not required if you do
not use a set-top box. A remote control is included with select models only.
11 USB 2.0 ports (2) Connect USB devices (USB 2.0) such as printers, external hard disk drives, digital
cameras, and MP3 players.
12 Audio Line In Connect MP3 players or other audio players. This connector is not for
headphones or a microphone.
13 Headphone jack Connect headphones to the port to listen to music without disturbing anyone.
14 Power connector Plug the power adapter into the computer.
15 Wireless keyboard and
mouse receiver Preinstalled receiver for using a wireless keyboard and mouse.
Activity LED indicator lights
Item Item Component
1 Webcam Indicates webcam activity.
2 Power Indicates the power state; blue indicates power on, and amber indicates Sleep
mode.
3 Hard disk drive Indicates hard disk drive activity.
4 Memory card reader Indicates memory card reader activity. When the LED is flashing, do not remove
your memory card.
When the LED is off, no card is inserted. A solid LED indicates that a card is
inserted with no read or write capacity. A flashing LED indicates that there is
memory card activity, and that a card has read/write capacity.
5 Remote control IR
receiver (select models
only) Indicates that your computer is working with your remote control to navigate
windows, record TV shows, and perform other activities in Windows Media Center.
6 Wireless keyboard and
mouse receiver Indicates wireless signals received from the wireless keyboard and mouse. The
LED is visible from the back of the computer.
7 Optical Disc Drive Indicates Optical Disc Drive is in use.
6 Chapter 2 Components