HP TOUCHSMART 9100 - Manual (Page 26)

Back cover
1. Prepare the computer for disassembly (see Preparing to disassemble the HP TouchSmart PC
on page 11 ).
2. Place the computer face down on a soft, flat surface.
3. Remove the hard drive/memory cover (see Hard drive/memory cover on page 12 ).
4. Remove the stand (see Stand on page 15 ).
5. Remove the I/O cover (see I/O cover on page 13 ).
6. Remove the feet (see Feet on page 14 ).
7. Squeeze the larger of the two pegs (1) holding the I/O cable clip in place and pull the clip off the
pegs (2).
20 Chapter 4 Removal and Replacement Procedures