Removal and replacement procedures, Preparing to disassemble the hp touchsmart pc, 4 removal and replacement procedures – HP TOUCHSMART 9100 User Manual
Page 17: 4removal and replacement procedures
4
Removal and Replacement Procedures
The following sections provide information about disassembling various components of the HP
TouchSmart PC.
Preparing to disassemble the HP TouchSmart PC
To avoid injury and equipment damage, always complete the following steps in order, when opening
the HP TouchSmart PC.
1.
Remove all media (CD, DVD, etc.) from the computer.
2.
Disconnect any external devices that are connected to the computer.
3.
Shut down the computer.
4.
After the system has completely shut down, disconnect the power adapter from the back of the
HP TouchSmart PC.
5.
Remove the connector cover by inserting your finger under the gap on the bottom-left side of the
cover and then pulling gently.
6.
Disconnect all other attached cables from the back of the HP TouchSmart PC.
Preparing to disassemble the HP TouchSmart PC
11