HP e-Vectra - Manual (Page 6)

Setting Up Your e-Vectra
6
Se
tt
in
g
Up
Y
ou
r e
-V
ec
tr
a
Connecting the External Power Supply
WARNING For your safety always use the AC adapter that came with your product.
Always use a power cord in compliance with your national safety standards like the one provided
to you by HP. This equipment can be disconnected from the power supply by removing the power
cord from the power outlet. This means the equipment must be located close to an easily
accessible power outlet.
Connect the AC adapter to the rear of the e-Vectra, then plug in the AC
adapter as indicated in the diagram below.
It is recommended that you install the port control system to prevent the
AC adapter from being unplugged. Refer to “Securing Your e-Vectra” on
page 7.
1
2
3