HP e-Vectra - Manual (Page 11)

Using Your e-Vectra
11
Us
in
g
Yo
ur
e
-V
ec
tr
a
Using Your e-Vectra
Caution Do not cover ventilation holes as this can cause overheating
Starting the e-Vectra for the First Time
Do not switch off the e-Vectra while the software is being initialized as this
could cause unexpected results.
1 Turn on the monitor first, and then the e-Vectra.
2 The software initialization routine starts. During this time, you will be
asked to carry out various tasks including entering the Windows
product ID# and selecting the regional settings to be used on your
e-Vectra.
3 After the initialization routine has finished, click on OK and the e-Vectra
will restart.
Stopping your e-Vectra
To stop the e-Vectra, exit all applications and then use your operating
system’s Shut Down command in the Start menu (for Windows NT 4.0,
Windows 98 and Windows 2000). If you want to force your e-Vectra to
shut, for example, if your operating system does not respond, press and
hold the power button for approximately 5 seconds.
Windows Product ID#
on/off button
Power on Status Light (green)
Hard Disk Activity Light (amber)