HP Media Gateways G250 - Manual (Page 70)

G250 technical specifications
70 Overview for the Avaya G250 and Avaya G350 Media Gateways
G250 power cord specifications
For North America: The cord set must be UL Listed/CSA Certified, 16 AWG, 3-conductor (3rd
wire ground), type SJT. One end is to be terminated to an IEC 60320, sheet C13 type connector
rated 10A, 250V. The other end is to be terminated to either a NEMA 5-15P attachment plug for
nominal 125V applications or a NEMA 6-15P attachment plug for nominal 250V applications.
For Outside North America: The cord must be VDE Certified or Harmonized (HAR), rated
250V, 3-conductor (3rd wire ground), 1.0 mm2 minimum conductor size. The cord is to be
terminated at one end to a VDE Certified/CE Marked IEC 60320, sheet C13 type connector
rated 10A, 250V and the other end to a 3-conductor grounding type attachment plug rated at a
minimum of 10A, 250V and a configuration specific for the region/country in which it will be
used. The attachment plug must bear the safety agency certifications mark(s) for the region/
country of installation.
G250 media module specifications
Table 17: Media modules
Description Value
Height 2 cm
Width 17 cm
Depth 31 cm
Weight 300-400 grams