Mm716 analog media module – HP Media Gateways G250 User Manual
Page 27
Supported media modules in the G350
Issue 5 June 2008
27
●
Analog tip/ring devices such as single-line telephones with or without LED message
waiting indication
MM714 also supports
●
Three ringer loads, which is the ringer equivalency number for up to 2,000 feet (610
meters) for all eight ports
●
Up to four simultaneously-ringing ports
●
Type 1 caller ID and Type 2 caller ID
●
Ring voltage generation for a variety of international frequencies and cadences
Figure 9: The MM714 media module
MM716 analog media module
The MM716 provides 24 analog ports supporting telephones, modem, and fax. These ports can
also be configured as DID trunks with either wink-start or immediate-start. The 24 ports are
provided via a 25 pair RJ21X amphenol connector, which can be connected by an amphenol
cable to a breakout box or punch-down block.
Configuring MM716 ports
The MM716 provides you with the capability to configure any of the 24 ports as:
●
Analog tip/ring devices such as single-line telephones with or without LED message
waiting indication
●
A wink-start or an immediate-start DID trunk
MM716 also supports
●
Three ringer loads, which is the ringer equivalency number for up to 2,000 feet (610
meters) for all 24 ports
●
Up to 24 simultaneously-ringing ports
●
Type 1 caller ID
●
Ring voltage generation for a variety of international frequencies and cadences
The MM716 is compatible with Avaya Communication Manager release 3.1 and higher, and
branch gateway firmware version 25.0.0 and higher.