HP 1740 SHDSL - Manual (Page 56)

1740 SHDSL 2/4-Wire Router User’s Guide
8.4 Virtual Server
If you want to set up Internet servers (such as an e-mail server, web server, or FTP server) on the virtual
LAN when PAT is enabled, you should register the servers with the router first to allow Internet users to
access the service via the WAN interface of router. This section describes how to configure a virtual
server.
Click on NAPT on the Advanced menu bar to access the NAPT Configuration screen.
Public Port: The virtual server provides service for the Internet users via this port.
Protocol: TCP or UDP (default: TCP).
Local Address: This is the IP address of the Virtual Server
Local port: This is the port that the virtual server is connected to the Ethernet.
After configuring the parameters, click Add to add an entry.
To modify the parameters, select an item from the List of NAPT Entries. Modify the parameters, and click
on the Modify button.
To delete the parameters, select an item from the List of NAPT Entries. Click on the Delete button.
56 September 2004 1740-A2-GB20-10