HP 1740 SHDSL - Manual (Page 30)

1740 SHDSL 2/4-Wire Router User’s Guide
3.6.2 Static Bridging (MAC filter)
Click on the Static tab to configure, modify, and delete the MAC filter functions.
Add Add a static bridging entry
Modify Modify the static bridging entries
Delete Delete a static bridging static entry
Flush Delete all the static bridging entries
MAC Address: This is the MAC address of the PC. Each PC has a unique MAC address, such as
0a:01:1a:11:00:0b.
Port Map: There are three modes to set up the data processing method for the LAN and ATM
interfaces: filter, forward, and dynamic. For example, if the Port Map is set to: LAN – Forward, and
others- Filter, it means the packets will be forwarded to the LAN interface and will not reach the ATM
interfaces. In dynamic mode, the operating mode of the MAC address in the interface follows the
learning result of the bridging function.
30 September 2004 1740-A2-GB20-10