HP 1740 SHDSL User Manual

Page 22

1740 SHDSL 2/4-Wire Router User’s Guide

STEP 3: Click LAN Setup on the menu bar to type the IP address for the LAN port. Click LAN Setup on

the menu bar and type the IP address and Subnet (should be 255.255.255.248 for static five IP address
service) and then click Apply.

Note: After the IP address is changed, your PC and the

router

are on different network segments.

Therefore, you cannot use the web browser to configure the

router

. You must change your PC’s IP

address.

22 September 2004 1740-A2-GB20-10