HP ZX6000 - Manual (Page 46)

2–14 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide
Troubleshooting
starting hp e-diagtools
1. Insert the HP IPF Offline Diagnostics and Utilities CD in the CD
or DVD drive.
2. From the EFI shell (page 1-17), select the CD/DVD drive:
a. Use the
map
command to list the drives on your system. For
example:
Shell> map
Device mapping table
fs0:Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM...
fs1:Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part...
blk0:Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)...
blk1:Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM...
NOTE: Lines are truncated to fit.
b. Change to the CD/DVD drive:
Shell> fs0:
fs0:>
3. Navigate to the EFI\BOOT directory on the CD:
a. Change to the EFI directory on the diagnostics CD.
fs0:> cd EFI
fs0\EFI:>
b. Execute the
ls
command to list the contents of the directory.
fs0:\EFI> ls
Directory of: fs1:\EFI
11/07/02 04:41p
0 File(s) 0 bytes
4 Dir(s)
lp0103gs.book Page 14 Tuesday, June 8, 2004 4:42 PM