HP ZX6000 - Manual (Page 24)

1–18 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide
Setting Up and Using Your System
4. You can now enter commands.
To run an individual command:
a. Type the command at the shell prompt. For example, to clear
the display on the monitor:
Shell:\> cls
b. Press Enter to execute the command.
◆ Some commands require additional arguments to further
define their action. For example, to display information
about the system memory, you must type the command
name, plus the desired category of information to display:
fs0:\> info mem
◆ When you enter individual commands at the command
prompt, the shell performs variable substitution, then
expands wild cards before the command is executed.
◆ To switch to a different file system, execute the
following, where fsx is the selected file system, as listed
on the screen (see step 2). For example:
Shell> fs0:
You see this prompt:
fs0:\> _
◆ You can also run EFI applications (files ending with
.efi
). To list applications in the current file system, run
the
ls
command. For example:
fs0:> ls
You see a list of applications on the fs0 file system.
lp0103gs.book Page 18 Tuesday, June 8, 2004 4:42 PM