HP ZX6000 User Manual
Page 27
HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide
1–21
Setting Up and Using Your System
■ Select Active Console Output Devices
lets you define
devices to display output from the system console.
❏
To select a monitor connected to the MP VGA port, choose
Acpi (HWP0002, 700)/Pci(2|0).
❏
To select a monitor connected to an AGP graphics card,
choose
Acpi (HWP0003, 0)/Pci(0|0).
NOTE: Some operating systems support multiple consoles, such as a
simultaneous serial and VGA output. See your OS documentation to
determine how many consoles are supported with your system.
Multiple consoles are not supported for HP-UX or Windows (use the
Smart Setup CD to switch between COM A and the MP on Windows
systems).
■ Select Active Console Input Devices
lets you define devices
to provide input to the system console.
■ Select Active Standard Error Devices
lets you define the
devices that display error messages from the system console.
■ Cold Reset
shuts down and restarts the system.
■ Exit
returns to the EFI startup menu.
lp0103gs.book Page 21 Tuesday, June 8, 2004 4:42 PM