beautypg.com

HP z558 User Manual

Page 35

background image

HP Digital Entertainment Center TV/Display Setup Guide

31

3 Click Device Settings and then uncheck Treat digital display as HDTV. Click Apply.
4 Select Native and then click Apply (Accept even though you see a slight overscan). Click OK.
5 Select Screen Resolutions and Refresh Rates from the left-side list. The window appears.
6 Uncheck Show standard HDTV formats in the lower left corner of the window. Click Yes to remove

HDTV custom timings pop-up

7 Adjust the slider bar to select the native screen resolution of your TV/Display. Click Apply.

If you do not know your native screen resolution, repeat this step until your text is clear with minimal overscan.
Write down your native screen resolution.

8 Click OK to close the window.
9 For the best picture, set your monitor to the native resolution using Screen Resolution and Refresh Rates. See

“Desktop Video Adjustments” on page 14.

CAUTION:

Be careful when changing settings. The HP Digital Entertainment Center Video Out requires specific

configurations for certain TV/Display types and resolutions. This setup procedure is advanced.