HP 4 FAMILY - Manual (Page 106)

HP Color LaserJet
Printer
As its name implies, the HP Color LaserJet printer is a
color laser printer. This 300 dpi printer adds several new
features to the PCL 5 language. These new features are
summarized in the table below and are described in detail
in the PCL 5 Color Technical Reference Manual (part
number 5961-0940). The printer also supports logical
operations, the HP-GL/2 Merge Control command, and
pixel placement (both PCL and HP-GL/2 commands). These
commands are described in the HP LaserJet 4L section of
this chapter and also in the PCL 5 Color Technical
Reference Manual.
Feature Status Comments
AppleTalk Configuration Modified In addition to supporting the RENAME, JOB, and TYPE
key values, this printer also supports the ZONE value.
Assign Color Index New Assigns the three current color components to the specified
palette index number.
Color Components 1, 2, 3 New These three commands specify the three color components of
any new color entry in the color palette.
Color lookup Tables New Enables and specifies color lookup tables to map color input
data into a new output range based on point-by-point
conversions. A lookup table is specified for each primary
color.
CR (Color Range—HP-GL/2) New Sets the range for specifying relative color data.
Configure Image Data New Configures the printer for color imaging—establishes a
modifiable color palette, sets the pixel encoding mode, and
sets the number of bits per index and per primary color.
Download Dither Matrix New Specifies a single dither matrix for all three primary colors.
Download Pattern New Downloads user-defined patterns, including color patterns,
to the printer.
Foreground Color New Sets the foreground color to the specified index of the
current palette.
Gamma Correction New Specifies the gamma correction to be applied equally to each
primary color.
Monochrome Print Mode New Provides a means to convert a color page to a quick-printing
gray-scale equivalent.
NP (Number of Pens—HP-GL/2) New Resizes the palette after the IN or ?*v#W commands.
Palette Control New Provides a mechanism for marking and deleting palettes.
Palette Control ID New Identifies a palette to be used for some of the palette control
functions.
Table 2-14. PCL Feature Additions for HP Color LaserJet Printer
2-70 Printer-Specific Differences