Honeywell VRX180 - Manual (Page 95)

Programming Function Blocks and Features
Video Recorder – User Manual 81
4.3 The Program mode menu
Program mode is an off-line mode for programming (configuring) the instrument. In this mode, all
outputs are frozen.
Table 4-1 shows the top level of the Program Mode menu with all available options. Your instrument
may have a reduced menu if options are not present or if features have been disabled.
Table 4-1 Program Mode Menu
Prompt Function
SET MODE Change operating mode of programmer
LABELS Enter descriptive labels for parameters using instrument’s buttons
or a QWERTY keyboard or barcode reader.
ANALOG INPUTS Program Analog Inputs.
CONTROL LOOPS Program Control Loops.
ANALOG OUTPUTS Program Analog Outputs.
DISCRETE INPUTS Program Discrete Inputs.
DISCRETE OUTPUTS Program Discrete Outputs.
CALCULATED VALUES Program Calculated Values.
ALARMS Program Alarms.
TOTALIZERS Program Totalizers.
PROFILERS Program Set point Profiles.
CONSTANTS Program Constants.
DISPLAYS Assign primary Online displays to the Display button.
FEATURES Enable/disable certain menu items.
SECURITY Enable/disable security on certain items.
SERIAL COMMUNICATIONS Program Serial Communication.
COPY BLOCK Copy any function block to another channel.
CLOCK Set time and date.
LOAD/STORE CONFIG Store and load configurations/calibrations.
SCAN RATE Set scan rate of instrument.
LANGUAGE Select language of instrument.