Honeywell VRX180 - Manual (Page 191)

Setpoint Profiler
Video Recorder – User Manual 177
Two types of profiles
A single phase profile is the simpler of the two profile types. It does not contain startup and shutdown
segments. It runs from Segment 1 to the last segment.
A multiphase profile divides the profile into three phases: the startup phase, the batch phase, and the
shutdown phase. With a multiphase profile you can rerun the batch phase multiple times (known as
AUTO CYCLING), or skip to the shutdown phase. The batch phase of a multiphase profile is specified
by the BATCH FIRST SEGMENT and BATCH LAST SEGMENT prompts. See Figure 5-2.
Single-Phase Profile
Multi-Phase Profile
END
END (shutdown)
END (batch)
BATCH FIRST SEGMENT (3) BATCH LAST SEGMENT (6)
Batch Segments
Startup
Segments Shutdown
Segments
Figure 5-2 Single and Multi-phase Profiles